Monte Carlo V6-3.8L SC VIN 1 (2004)
![background image](/chevrolet/monte_carlo/v6-3.8l_sc_vin_1/Page-328002.png)
4. Remove the spark plug wires from the ignition coils.
5. Remove the spark plug wire retaining clips from the rear, front and top of the engine.
6. Remove the spark plug wires from the engine.
7. When replacing the spark plug wires transfer any of the following:
-
Boot heat shields
-
Spark plug wire conduit
-
Spark plug wire retaining clips
INSTALLATION PROCEDURE
1. Position the spark plug wires to the engine.
2. Install the spark plug wire retaining clips from the rear, front and top of the engine.
3. Install the spark plug wires to the ignition coil in the proper position.