Monte Carlo V6-3.8L SC VIN 1 (2004)
Throttle Cable/Linkage: Service and Repair
Accelerator Controls Cable Replacement
ACCELERATOR CONTROLS CABLE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the fuel injector sight shield.
2. Remove the left instrument panel sound insulator.
3. Remove the accelerator cable (5) from the accelerator pedal (1).
4. Attach a piece of mechanics wire to aid in the installation of the new cable.
5. Squeeze the accelerator cable cover tangs and push the accelerator cable through the cowl.
6. Remove the accelerator cable from both retaining clips.
