Monte Carlo V6-3.8L SC VIN 1 (2004)
4. Install the side impact sensor (1) fasteners. Tighten the fasteners with hand tools only.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the fasteners to 10 N.m (89 lb in).
5. Press the outer energy absorber pad toward the outer door panel and secure the pad with the clip.
6. Install the Inner energy absorber pad.
7. Install the water deflector as required.
8. Install the left door trim panel.
9. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 2 (Impala)SIR Disabling and Enabling Zone 2 (Monte Carlo).
