Monte Carlo V6-3.8L SC VIN 1 (2004)
Alternator: Service and Repair
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Remove the generator.
3. Remove the generator bracket bolts.
4. Remove the generator bracket.
5. Remove the engine lift hook.
INSTALLATION PROCEDURE
1. Install the engine lift hook.
2. Install the generator bracket to the engine.
3. Install the generator bracket bolts.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the bolts to 50 N.m (37 lb ft).
4. Install the generator.
5. Connect the negative battery cable.
