Monte Carlo V6-3.8L SC VIN 1 (2004)
1.
Install the J 36850 to the case side cover 0-ring (59).
2.
Install the 0-ring (59) to the case side cover.
3.
Install the case side cover gasket (54).
4.
Install the case side cover (53), by first installing any 2 of the upper case side cover bolts (56, 58).
Note:
Refer to Fastener Notice in Cautions and Notices.
5.
Install the case side cover bolts (56, 57, 58).
Tighten
Tighten bolts to 25 N.m (18 lb ft).
6.
Install the transaxle mount bracket
7.
Install the transaxle mount bracket bolts.