Monte Carlo V6-3.8L SC VIN 1 (2004)
Fluid Line/Hose: Service and Repair
Transmission Oil Cooler Line Quick Connect Fitting
Transmission Oil Cooler Line Quick Connect Fitting
Removal Procedure
1. Disengage the plastic cap from the quick connect fitting. Pull the plastic cap back along the pipe.
2. Hold one leg of the retaining clip.
3. Using a small pick-type tool or bent screwdriver, gently disengage the other end of the retaining clip from the quick connect fitting.
4. Rotate the retaining clip out of the quick connect fitting. Remove the retaining clip completely.
5. Disconnect the cooler line from the quick connect fitting.
Installation Procedure
Important: Failure to properly install the retaining clip could cause the cooler line to come loose and cause damage to vehicle components.
