Monte Carlo V6-3.8L SC VIN 1 (2004)
Shift Interlock Solenoid: Service and Repair
With Floor Shift
Automatic Transmission Shift Lock Actuator Replacement (Floor Shift)
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the center console.
3. Disconnect the automatic shift lock actuator electrical connector.
4. Remove the automatic shift lock actuator from the pivot point (1), the base of the shift lock control and the vehicle.
Installation Procedure
1. Install the automatic shift lock actuator to the base of the shift lock control and the pivot point (1).
