Monte Carlo V6-3.8L SC VIN 1 (2004)
Torque Converter: Service and Repair
Flywheel to Torque Converter Bolt Replacement
Tools Required
^
J 37096 Flywheel Holder
Removal Procedure
1. Raise and support the vehicle.
2. Remove the torque converter cover bolts.
3. Remove the torque converter covers.
4. Install the J 37096 in order to gain access to the torque converter bolts and to prevent the flywheel from turning.
5. Remove the flywheel to torque converter bolts.
Installation Procedure