Monte Carlo V6-3.8L SC VIN 1 (2004)
Torque Converter Cover: Service and Repair
Torque Converter Cover Replacement
Removal Procedure
1. Raise and support the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Remove the torque converter cover bolts
3. Remove the torque converter covers.
Installation Procedure
1. install the torque converter covers.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the torque converter cover bolts
Tighten the bolts to 10 Nm (89 inch lbs.).
3. Lower the vehicle.
