Monte Carlo V6-3.8L SC VIN 1 (2004)
Transmission Mount: Service and Repair
Automatic Transmission Mount Replacement
Automatic Transmission Mount Replacement
Removal Procedure
1. Raise and support tire vehicle.
2. Remove the left tire and wheel, assembly.
3. Remove left inner splash shield.
4. Position a transmission jack under the transaxle.
5. Remove the transaxle mount upper nuts from the transaxle bracket.
6. Carefully raise the transaxle assembly.
7. Remove the transaxle mount lower nuts from the frame.
8. Remove the transaxle mount from the frame.
Installation Procedure
1. Position the transaxle mount to the frame.