Monte Carlo V6-3.8L SC VIN 1 (2004)
Transmission Mount: Service and Repair
Automatic Transmission Mount Bracket Replacement
Automatic Transmission Mount Bracket Replacement
Removal Procedure
1. Raise and support the vehicle.
2. Remove the left front tire and wheel assembly.
3. Remove the left engine splash shield.
4. Support the transaxle
5. Remove the transaxle bracket to transaxle mount upper nuts.
6. Remove the bolts which secure the transaxle bracket to the transaxle.
7. Remove the transaxle bracket.
Installation Procedure
1. Position the transaxle bracket to the transaxle.
