Monte Carlo V6-3.8L SC VIN 1 (2004)
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the transaxle bracket bolts.
Tighten the bracket bolts to 95 Nm (70 ft. lbs.).
3. Remove the support from the transaxle.
4. Install the upper nuts which secure the transaxle bracket to the transaxle mount.
Tighten the upper nuts to 47 Nm (35 ft. lbs.).
5. Install the left engine splash shield.
6. Install the left front tire and wheel.
7. Lower the vehicle.
