Monte Carlo V6-3.8L SC VIN 1 (2004)
2. Install the oil pump bolts (206, 207).
^
Tighten the M6 X 1.0 X 85 bolts (207) to 12 Nm (106 inch lbs.).
^
Tighten the M6 X 1.0 X 95 bolts (206) to 16 Nm (12 ft. lbs.).
3. Connect the electrical connectors to the solenoid valves (315A, 315B, 322, 334 and 440), the TFP manual valve position switch (395) and the
temperature sensor (391).
4. Install the case side cover.
