Monte Carlo V6-3.8L SC VIN 1 (2004)
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the front window regulator bolts into the key slots.
Tighten the front window regulator motor and the rail bolts to 10 N.m (89 lb in).
5. Remove the tape from the front window and position the front window to the front window regulator carrier plate.
6. Connect the front window to the front window regulator carrier plate.
7. Connect the electrical connector to the front window regulator motor.
8. Install the inner energy absorber.
9. Install the front door water deflector.
10. Install the front door trim panel.