Monte Carlo V6-3.8L SC VIN 1 (2004)
Wiper Control Module: Service and Repair
WIPER DRIVE SYSTEM MODULE REPLACEMENT
TOOLS REQUIRED
-
J 39232 Wiper Transmission Separator
-
J 39529 Wiper Transmission Installer
REMOVAL PROCEDURE
1. Remove the air inlet grille panel.
2. Remove the wiper motor water deflector.
3. Using the J 39232 , disconnect the wiper transmission from the wiper motor crank arm to aid in the removal of the wiper drive system module.
4. Remove the wiper drive system module screws.
5. Disconnect the wiper motor electrical connector.
6. Remove the wiper drive system module from the vehicle.
INSTALLATION PROCEDURE