Monte Carlo V6-3.8L VIN K (1998)
Front Door Exterior Handle: Service and Repair
REMOVAL PROCEDURE
1. Remove the trim panel.
2. Remove the energy absorber pad (coupe only).
3. Remove the water deflector.
4. Cut off the outside handle rod-to-lock clip from the lock. Use side cutters.
5. Unscrew the remainder of the clip from the outside handle rod.
6. Discard the clip.
7. Drill out the outside door handle rivets (3).
8. Remove the outside door handle from the handle rod and the door.
INSTALLATION PROCEDURE