Monte Carlo V6-3.8L VIN K (1998)
3. By hand press down firmly on the brake solenoid valve (2) until the brake solenoid valve flange seats on the ABS brake modulator (4).
4. Install the Torx head bolts (1).
^
Tighten the Torx(R) head bolts (1) to 4.5 Nm (40 inch lbs.).
NOTICE: Refer to Fastener Notice in Cautions and Notices.
IMPORTANT: Verify proper installation of the brake solenoid valve connectors (5) on the correct brake solenoid valve (2).
5. Install the brake solenoid valve electrical connector (5) onto the brake solenoid valve (2).
6. Bleed the brake modulator/master cylinder assembly.