Monte Carlo V6-3.8L VIN K (1998)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor Jumper Harness Replacement (Right Front)
REMOVAL PROCEDURE
1. Raise and support the vehicle on a suitable hoist.
2. Remove the connector from the right front wheel sensor.
3. Remove the harness (2) from the control arm retaining clips (1).
4. Remove the harness (2) from the splash shield retaining clips.
5. Remove the right front wheel speed sensor jumper harness (2) to ABS harness connector (1).
6. Remove the right front wheel speed sensor jumper harness (2).
INSTALLATION PROCEDURE