Monte Carlo V6-3.8L VIN K (1998)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor Jumper Harness Replacement (Right Rear)
REMOVAL PROCEDURE
1. Raise and support the vehicle on a suitable hoist.
2. Remove the right rear wheel bearing and the speed sensor assembly.
3. Remove the right rear wheel speed sensor jumper harness electrical connector (2) from the body connector (3) or the rear ABS connector.
4. Remove the right rear wheel speed sensor jumper harness (1) from the restraints.
5. Remove the right rear wheel speed sensor harness (1) from the vehicle.
INSTALLATION PROCEDURE
1. Install the right rear wheel speed sensor harness (1) onto the vehicle.