Monte Carlo V6-3.8L VIN K (1998)
Brake Rotor/Disc: Service and Repair
Brake Rotor Replacement (Front)
REMOVAL PROCEDURE
1. Raise and suitably support the vehicle.
2. Remove the tire and the wheel.
3. Remove the caliper mounting bracket (2).
4. Remove the brake rotor (1).
5. Clean the metal contact surfaces between the brake rotor and the hub bearing flange.
INSTALLATION PROCEDURE
1. Install the brake rotor (1).
2. Install the caliper mounting bracket (2).
3. Install the tire and the wheel.
4. Lower the vehicle.