Monte Carlo V6-3.8L VIN K (1998)
14. Connect the radiator outlet hose. Refer to Radiator Outlet Hose Replacement (3800 Engine) in Cooling System.
15. Install the oil filter. Refer to Engine Oil and Oil Filter Replacement
16. Install the crankshaft position sensor shield.
17. Connect the wiring harness connectors to the engine front cover.
18. Install the crankshaft balancer. Refer to Crankshaft Balancer Replacement.
19. Install the drive belt tensioner. Refer to Drive Belt Tensioner Replacement.
20. Connect the battery ground (negative) cable. Refer to Battery Negative Cable Disconnect/Connect in Starting and Charging.
21. Fill the cooling system with engine coolant. Refer to Draining and Filling Cooling System in Cooling System.
22. Fill the crankcase with clean engine oil. Refer to General Information.
23. Inspect for proper fluid levels.
24. Inspect for leaks.
