Monte Carlo V6-3.8L VIN K (1998)
2. Install the new right (rear) exhaust manifold gasket.
3. Install the right (rear) exhaust manifold.
4. Install the right (rear) exhaust manifold bolts and nuts.
^
Tighten the right (rear) exhaust manifold bolts and nuts to 30 Nm (22 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
5. Install the lower right (rear) exhaust manifold heat shield.
6. Install the upper right (rear) exhaust manifold heat shield.
