Monte Carlo V6-3.8L VIN K (1998)
Spot Lamp: Service and Repair
Spotlamp Bulb With SEO 9C3
CAUTION: Halogen bulbs contain a gas under pressure. Handling a bulb improperly could cause it to shatter into flying glass fragments. To
help avoid personal injury:
^ Turn off the light switch and allow bulb to cool before changing bulbs. Leave the switch off until the bulb change is complete.
^
Always wear eye protection when changing a halogen bulb.
^
Handle the bulb only by its base. Avoid touching the glass.
^
Do not drop or scratch the bulb.
^
Keep moisture away.
^
Place the used bulb in the new bulb's carton and dispose of it properly. Keep halogen bulbs out of the reach of children.
REMOVE OR DISCONNECT
1. Battery ground (negative) cable.
2. Spotlamp bezel retaining screw.
3. Spotlamp bulb and bezel from spotlamp housing.
4. Electrical connectors.
5. Spotlamp bulb from bezel.
INSTALL OR CONNECT
1. Spotlamp bulb into bezel.
2. Electrical connectors.
3. Spotlamp bulb and bezel into spotlamp housing.
4. Spotlamp bezel retaining screw.
5. Battery ground (negative) cable.
