Monte Carlo V6-3.8L VIN K (1998)
Tail Lamp: Service and Repair
Tail Lamp
REMOVE OR DISCONNECT
1. Open rear compartment.
2. Rear compartment convenience net.
3. Pull back rear compartment trim panel, as needed.
4. Nuts from tail lamp.
5. Tail lamp from body.
6. Socket from tail lamp.
7. Bulb from socket.
INSTALL OR CONNECT
NOTE: Refer to Fastener Notice in Cautions and Notices.
1. Bulb to socket.
2. Socket to tail lamp.
3. Tail lamp to body.
4. Nuts to tail lamp.
Tighten
^
Nuts to 4 N.m (35 lb. in.).
5. Reposition rear compartment trim panel.
6. Rear compartment convenience net.
7. Close rear compartment.