Monte Carlo V6-3.8L VIN K (1998)
EGR Valve: Service and Repair
REMOVAL PROCEDURE
1. Disconnect the electrical connector from the EGR valve.
2. Remove the EGR valve retaining nuts (4).
3. Remove the EGR valve (1).
4. Remove the gasket (2) from the EGR valve adapter (3).
INSTALLATION PROCEDURE
1. Install a new gasket (2) on the EGR adapter (3).
2. Install the EGR valve (1) and the retaining nuts (4).
Tighten
^
Nuts to 30 Nm (22 lb. ft.).
3. Connect the EGR valve electrical connector.
