Monte Carlo V6-3.8L VIN K (1998)
Air Bag Control Module: Service and Repair
First Repair
IMPORTANT: If the SDM mounting holes or fasteners are damaged to the extent that the module can no longer be properly mounted, use the
following repair. Torque the replacement fastener with a hand tool in order to prevent stripping the replacement fastener.
Description
^
First Repair
1. Remove the stripped fastener and discard it.
NOTICE: Refer to Fastener Notice in Vehicle Damage Warnings.
2. Install the SDM with larger fastener GM P/N 10267482.
3. Tighten
Tighten fastener to 5 N.m (44 lb in).