Monte Carlo V6-3.8L VIN K (1998)
Seat Belt Buckle: Service and Repair
Passenger Seat Buckle Side Belt Replacement
Removal Procedure
Description
Tools Required
J 29843-9 Door Lock Striker and Seat Belt Torx(R) Wrench
1. Remove the buckle side belt plug (3) from the sleeve.
2. Use the J 29843-9 in order to remove the passenger seat buckle side belt bolt (4).
3. Remove the passenger seat buckle side belt (2) from the vehicle.
Installation Procedure
Description
Tools Required
J 29843-9 Door Lock Striker and Seat Belt Torx(R) Wrench
1. Install the passenger seat buckle side belt (2) to the vehicle.
NOTICE: Refer to Fastener Notice in Service Precautions.
2. Use the J29843-9 in order to install the passenger seat buckle side belt bolt (4).
Tighten
Tighten the passenger seat buckle side belt bolt to 42 N.m (31 lb ft).
3. Install the passenger seat buckle side bolt plug (3) to the sleeve.
