Monte Carlo V6-3.8L VIN K (1998)
Seat Belt Guide Track: Service and Repair
Removal Procedure
Description
Tools Required
J 29843-9 Door Lock Striker and Seat Belt Torx(R) Wrench
1. Open the upper seat belt guide loop plastic cover.
2. Remove the upper seat belt guide loop nut.
3. Remove the center pillar (1) upper trim panel. Refer to Center Pillar Upper Trim Panel in Doors.
4. Use the J29843-9 in order to remove the shoulder belt guide loop adjuster bolts (2).
5. Remove the shoulder belt guide loop adjuster bracket (3) from the vehicle.
