Monte Carlo V6-3.8L VIN K (1998)
Seat Belt Retractor: Service and Repair
Driver Seat Retractor Side Belt Replacement
Sedan
Tools Required
J 29843-9 Door Lock Striker and Seat Belt Torx(R) Wrench
Description
1. Open the upper seat belt guide loop plastic cover (7).
2. Remove the upper seat belt guide loop nut (5).
3. Remove the upper guide loop (6) from the adjuster bracket (1).
Description
4. Remove the rear carpet retainer. Refer to Carpet Retainers in Seats and Carpet.
5. Use the J 29843-9 in order to lower the seat belt anchor plate bolt.
6. Remove the anchor plate from the center pillar.
7. Route the seat belt (4) from the hole at the bottom of the carpet retainer.
8. Use the J29843-9 in order to remove the seat belt retractor bolt (2).
9. Remove the seat retractor side belt (1) from the vehicle.
Coupe
Tools Required
J 29843-9 Door Lock Striker and Seat Belt Torx(R) Wrench
