Monte Carlo V6-3.8L VIN K (1998)
Description
6. Use the J 29843-9 in order to remove the lower seat belt anchor plate bolt (2).
7. Remove the seat retractor side belt (3) from the vehicle.
Installation Procedure
Tools Required
J 29843-9 Door Lock Striker and Seat Belt Torx(R) Wrench
Description
1. Install the seat retractor side belt (3) to the vehicle.
NOTICE: Refer to Fastener Notice in Service Precautions.
2. Use the J 29843-9 in order to install the lower seat belt anchor bolt (2).
Tighten
Tighten the lower seat belt anchor plate bolt to 42 N.m (31 lb ft).
