Monte Carlo V6-3.8L VIN K (1998)
Description
3. Hook the seat belt retractor (1) to the vehicle.
Description
4. Use the J29843-9 in order to install the seat belt retractor bolt (2).
Tighten
Tighten the seat belt retractor bolt to 42 N.m (31 lb ft).
5. Install the rear window trim panel. Refer to Rear Window Trim Panel in Body Rear End.
6. Install the rear quarter lower trim panel. Refer to Quarter Lower Trim in Rear Quarters.
7. Install the rear seat cushion and seatback. Refer to Rear Seat Back in Seats and Carpet.