Monte Carlo V6-3.8L VIN K (1998)
Install the generator front lower bolt.
Tighten
Tighten the generator front lower generator bolt to 50 N.m (37 lb ft).
5. Install the generator brace stud through the generator flange and the generator bracket.
Tighten
Tighten the generator brace stud to 30 N.m (22 lb ft).
6. Install the inboard generator bolt through the flange and into the generator brace assembly. CS144 generator only.
Tighten
Tighten the generator bolt to 50 N.m (37 lb ft).
7. Install the generator rear brace bolt. CS13OD generator only.
Tighten
Tighten the generator rear brace bolt to 30 N.m (22 lb ft).