Monte Carlo V6-3.8L VIN K (1998)
Tighten
^
Tighten the bolts to 43 N.m (31.7 lb ft).
3. Install the torque converter cover.
4. Install the electrical connections to the starter.
Tighten
^
Tighten the starter solenoid switch BAT terminal outer nut to 9.5 N.m (84.08 lb in).
^
Tighten the starter solenoid switch S terminal nut to 2.3 N.m (8.8 lb in).
5. Lower the vehicle.
6. Connect the battery ground (negative) cable.
