Monte Carlo V6-3.8L VIN K (1998)
1. Remove the case side cover. Refer to Case Side Cover Replacement.
2. Disconnect the transaxle wiring harness.
3. Remove the 1-2 shift solenoid (315).
INSTALLATION PROCEDURE
1. Install the 1-2 shift solenoid (315).
2. Connect the transaxle wiring harness.
3. Install the case side cover. Refer to Case Side Cover Replacement.
2-3 Shift Solenoid Replacement
REMOVAL PROCEDURE
1. Remove the case side cover. Refer to Case Side Cover Replacement
