Monte Carlo V6-3.8L VIN K (1998)
8. Turn the ignition key to the LOCK position.
9. Snap the cable end onto the shifter park lock lever pin.
10. Push the cable connector nose forward to remove the slack.
11. Snap the cable connector lock button down using no load applied to the connector nose.
12. Install the column. Refer to Steering Wheel and Column On-Vehicle Service.
13. Inspect the functional operation of the park/lock cable. Refer to Park Lock Cable Adjustment.
14. Install the console. Refer to Instrument Panel, Gauges and Warning Indicator.
15. Connect the battery ground (negative) cable. Refer to Battery Negative Cable Disconnect/Connect in Starting and Charging.