Monte Carlo V6-3.8L VIN K (1998)
4. Install the automatic transaxle range selector cable to the shift control lever.
5. Install the steering column trim panel. Refer to Instrument Panel, Gauges and Warning Indicator.
6. Install the automatic transaxle range selector cable retainer to the stud in the engine compartment.
7. Adjust the transaxle side automatic transaxle range selector cable. Refer to AT Range Selector Cable Adjustment
A/T Range Selector Cable Bracket Replacement
REMOVAL PROCEDURE
1. Remove the throttle body air inlet duct. Refer to Powertrain Management.
2. Remove the automatic transaxle range selector cable from the automatic transaxle range selector lever.