Monte Carlo V6-3.8L VIN K (1998)
4. Install the automatic transaxle range selector cable to the automatic transaxle range selector lever.
5. Adjust the automatic transaxle range selector cable if necessary. Refer to AT Range Selector Cable Adjustment
6. Install the throttle body air inlet duct. Refer to Powertrain Management.
Shift Control Replacement
REMOVAL PROCEDURE
1. Remove the console. Refer to Instrument Panel, Gauges and Warning Indicator.
2. Remove the console wiring harness.
3. Remove the console shift control wiring harness.
4. Remove the automatic transaxle range selector cable. Refer to AT Range Selector Cable Replacement (At Console Shift Control).
5. Remove the park/lock cable. Refer to Park Lock Cable Replacement.