Monte Carlo V6-3.8L VIN K (1998)
Torque Converter Clutch Solenoid: Service and Repair
4T65-E Automatic Transaxle
REMOVAL PROCEDURE
1. Remove the case side cover. Refer to Case Side Cover Replacement.
2. Disconnect the transaxle wiring harness.
3. Remove the torque converter clutch PWM solenoid (334).
INSTALLATION PROCEDURE
1. Install the torque converter clutch PWM solenoid (334).
2. Connect the transaxle wiring harness.
3. Install the case side cover. Refer to Case Side Cover Replacement.
