Monte Carlo V6-3.8L VIN K (1998)
Replacement
2. Remove the auxiliary transaxle oil cooler nuts from the lower radiator support.
3. Remove the auxiliary transaxle oil cooler bolts from the upper radiator support.
4. Remove the auxiliary transaxle oil cooler.
INSTALLATION PROCEDURE
1. Install the auxiliary transaxle oil cooler.
2. Install the auxiliary transaxle oil cooler bolts to the upper radiator support.
^
Tighten the auxiliary transaxle oil cooler bolts to 25 Nm (18 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
3. Install the auxiliary transaxle oil cooler nuts to the lower radiator support.
^
Tighten the auxiliary transaxle oil cooler nuts to 10 Nm (97 inch lbs.).
IMPORTANT: The correct thread engagement is critical. Crossthreaded fittings can achieve proper tightness value and still leak.
4. Install the auxiliary transaxle oil cooler hose and pipe fittings to the auxiliary transaxle oil cooler. Refer to Auxiliary AT Oil Cooler Hose
Replacement.
