Monte Carlo V6-3.8L VIN K (1998)
Power Window Switch: Service and Repair
Armrest Pull Cup
ARMREST PULL CUP
Front Door - Coupe and Sedan
Pull Cup
REMOVE OR DISCONNECT
1. Screw.
2. Pull cup by prying rear end of pull cup, then pulling up and away rearward to disengage front snap.
3. Electrical connector, if equipped.
INSTALL OR CONNECT
1. Pull cup to trim panel.
2. Electrical connector, if equipped.
3. Screw.
TIGHTEN
^
Screw to 3.4 Nm (30 lb. in.).