Monte Carlo V6-3.8L VIN K (1998)
1. Remove the window regulator handle, if equipped.
2. Remove the inner trim panel screw at the retractor cover opening (coupe only).
3. Remove the power window switch (coupe only).
4. Remove the inside handle bezel.
5. Remove the front door inner trim panel screws (3).
6. Carefully lift the trim panel upwards in order to release the top portion of the inner trim panel (1).
7. Pull the trim panel towards you to remove the trim panel from the door.
8. Disconnect all necessary electrical connectors.
9. Remove the outside mirror remote control cable, if equipped.
INSTALLATION PROCEDURE