Monte Carlo V6-3.8L VIN K (1998)
1. Remove the rear door inside handle bezel screw.
2. Pull on bezel end opposite handle to release retainer.
3. Remove the rear door inside handle bezel from the door.
4. Disconnect the electrical connector.
5. Remove the window switch from the bezel, as needed.
INSTALLATION PROCEDURE
1. Install the window switch to the bezel, as needed.
2. Connect the electrical connector.
3. Install the rear door inside handle bezel to the door.
4. Install the rear door inside handle bezel retainer.
5. Install the rear door inside handle bezel screw.
Water Deflector
WATER DEFLECTOR
Front Door - Coupe and Sedan
Water Deflector
A waterproof deflector is used to seal the door inner panel and prevent entry of water into the body. The deflector is secured to the door inner panel
with pressure-sensitive tape located on the outboard surface of the deflector. This allows the deflector to be peeled back as needed to service door
components.