Monte Carlo V6-3.8L VIN K (1998)
Wiper Motor: Service and Repair
Park Switch Operation
REMOVE OR DISCONNECT
1. Wiper motor cover assembly.
Important
^
If wiper motor is in park position, operate wiper motor as required to remove pawl from relay slot.
2. Screw (24) and park switch assembly (25) from wiper motor assembly (23).
INSTALL OR CONNECT
NOTE: Refer to fastener "Notice" in "Cautions and Notices."
1. Park switch assembly (25) on wiper motor assembly (23) with screw (24).
2. Operate wiper motor assembly (23) back into park position (pawl is in relay slot).
3. Wiper motor coverassembly on wiper motor.