Monte Carlo V6-3.9L VIN 1 (2006)
Case: Service and Repair
Case Side Cover Replacement
^
Tools Required
-
J 36850 Transjel Lubricant
Removal Procedure
1. Remove the engine site shield.
Refer to the following:
^
Intake Manifold Cover Replacement for the 3.5L engine
^
Intake Manifold Cover Replacement for the 3.9L engine
^
Engine Sight Shield Replacement for the 5.3L engine
2. Remove the air cleaner outlet duct.
Refer to the following:
^
Air Cleaner Outlet Duct Replacement for the 3.5L engine
^
Air Cleaner Outlet Duct Replacement for the 3.9L engine
^
Air Cleaner Resonator Outlet Duct Replacement for the 5.3L engine
3. Remove the transaxle shift cable from lever and bracket from the transaxle.
4. Disconnect the transaxle wiring harness connector and disconnect the harness retainer from side cover stud.
5. Remove the engine mount struts.
Refer to the following:
^
Engine Mount Strut Replacement for the 3.5L engine
^
Engine Mount Strut Replacement for the 3.9L engine
^
Engine Mount Strut Replacement for the 5.3L engine
6. Remove the top case side cover bolt (56, 58).
7. Install the engine support fixture to support the engine/transaxle assembly.
Refer to the following:
^
Engine Support Fixture for the 3.5L engine
^
Engine Support Fixture for the 3.9L engine
^
Engine Support Fixture for the 5.3L engine
8. Raise and support the vehicle. Refer to Vehicle Lifting.
9. Remove the left front wheel.