Monte Carlo V6-3100 3.1L VIN M SFI (1995)
REMOVE OR DISCONNECT
1. Rocker ann nuts (133).
^
Place valve train parts in a rack so that they can be installed in the same location which they were removed.
2. Rocker arms (131) and balls (130).
3. Pushrods (129).
IMPORTANT
^
Use care when removing pushrods so they do not fall down into the lifter valley.
INSPECT
^
Rocker arms (131) and balls (132) for wear at rotation surfaces.
^
Pushrod (129) ends for wear.
^
Pushrod (129) for bends.
WITH STANDARD NON-ADJUSTABLE ROCKER ARMS
