chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

All Technical Service Bulletins for Turn Signal Switch: > < Turn Signal Lever - Does Not Stay in Detent Position|Page 635
Page 3
background image

Figure 4 shows the proper way to rotate the switch prior to installation, to insure that the wires are routed correctly.

4.

Verify that the wires are routed as shown in Figure 2. Reassemble the upper steering column components. Reinstall the lower left trim panel.

Enable the SIR system. Reconnect the negative battery cable.

Parts Information

Parts are currently available from GMSPO.

Warranty Information

For vehicles repaired under warranty.

All Technical Service Bulletins for Turn Signal Switch: > < Turn Signal Lever - Does Not Stay in Detent Position|Page 635