Monte Carlo V8-5.3L (2007)
4. Install the exhaust manifold heat shield (603).
5. Install the exhaust manifold heat shield bolts (604).
Tighten the bolts to 9 N.m (80 lb in).
6. Install the oil level indicator tube.
7. Install the left side spark plugs.
8. Install the exhaust crossover pipe nuts from the left exhaust manifold.
Tighten the nuts to 25 N.m (18 lb ft).
9. Install the exhaust crossover pipe heat shield.
10
Install the heater pipe retainer bolts.
Tighten the bolts to 16 N.m (12 lb ft).
11
Install the engine sight shield.