Nova/Chevy II L4-1600cc 4ALC Nummi (1988)
Brake Master Cylinder: Service and Repair
Reservoir Replacement
Figure 5A-1 Exploded View Of Master Cylinder Assembly
REMOVAL:
Figure 5A-4 Removing/Installing Set Screw
1.
Remove the cap and strainer from the reservoir.
2.
Remove the set screw and pull out the reservoir.
3.
Remove the two grommets from the master cylinder.
4.
Inspect reservoir for cuts, corrosion, or other abnormal conditions and replace as necessary.
INSTALLATION:
1.
Apply clean brake fluid to the reservoir grommets and install.
