Nova/Chevy II L4-1600cc 4ALC Nummi (1988)
Crankshaft Main Bearing Seal: Service and Repair
EXC. 16 VALVE ENGINE
1.
Remove transaxle and flywheel assembly.
2.
Remove rear end plate.
3.
Carefully pry oil seal from groove.
4.
Replace old oil seal with a new one, then apply a suitable lubricant.
5.
Assemble rear end plate onto engine, then insert and securely tighten attaching bolts.
6.
Assemble flywheel assembly to engine, then install transaxle.
