Nova/Chevy II L4-1600cc 4ALC Nummi (1988)
Suspension Strut / Shock Absorber: All Technical Service Bulletins
Strut Assembly - Disassemble/Assemble Procedure
Number:
90-02-3C
Section:
3C
Date:
APRIL, 1989
Subject:
REVISED STRUT ASSEMBLY DISASSEMBLE/ASSEMBLE PROCEDURE
Model and Year:
1989-90 S-CAR
TO:
ALL CHEVROLET DEALERS
This Service Manual Update replaces the strut disassemble/assemble procedure found in Section 3C, page 3C-4 and Figure 7 on page 3C-5.
DISASSEMBLE/ASSEMBLE STRUT
Disassemble
Tools Required:
J 3289-20 Holding Fixture Bench Mount
J 34013-A Strut Spring Compressor
J 34013-97 Upper Strut Spring Compressor Adapter
J 34018-88 Lower Strut Spring Compressor Adapter
*
Attach a J 34013-97 upper strut spring compressor adapter to J 34013-A strut spring compressor with the 4 wing nuts.
*
Attach a J 34013-88 lower strut spring compressor adapter to J 34013-A strut spring compressor with the compressor lock pins.
*
Ensure strut is positioned on J 34013-A strut spring compressor with the "OUT" stamping on-the spring seat facing outward.
1.
Strut rod piston nut cover.
2.
Strut rod piston nut.
3.
Suspension support.
*
Release compressed spring using a J 34013-A strut spring compressor.
4.
Dust seal, spring seat, upper insulator, coil spring, and lower insulator.
Assemble